EEA-PAM-571-D-32

Product Description

The EEA-PAM-571-D-32 is a power amplifier from Eaton in its D series of EEA-PAM amplifiers. The amplifier comes integrated with a PID module and encompasses various LEDs, potentiometers, and DIL switches. The built-in test feature helps in troubleshooting the Eurocard type unit very easily. The Vickers brand power amplifier is CE Certified. The DIL switches and potentiometers help in configuring the same device in different ways. The power amplifier is designed such that it needs very little external wiring. We can give you the unit with a one-year warranty period and send it to any address worldwide.

The amplifier has an automatic switchover P/Q function that supports both external and internal switchover from Q to P. It also houses a ramp generator. When the command input ramps are enabled, an LED on the front panel of the amplifier gets illuminated in yellow. The unit supports the closed-loop operation. The device is intended for use with the CUV-EP1 set of valves from the manufacturer. It operates using a 24V input power supply. The power amplifier weighs approximately 0.4kg. The unit is CE Certified. It has a +/-10% sensor signal offset range. The device is almost similar to its corresponding A-series amplifier from the manufacturer. However, it does not support the gain feature of the A-series,

The power amplifier comes along with installation and startup guidelines. The ramp active indicator has 10-kilo ohms output resistance. The amplifier has an ambient operating temperature range between 0°C and 50°C. The PID controller has a voltage range of 0 to 3.5V when it is disabled. It is used for closed-loop position control and closed-loop velocity control applications. There are two potentiometers for adjusting the deadband compensation and command ramp values in both directions - up and down.