PZ0A050AR31P00

Product Description

The PZ0A050AR31P00 Servo Amplifier is highly rigid and is used in various general industrial machines. The Sanyo Denki Amplifier is used with the R3 type P series servomotor from the manufacturer. The device features ABS-E wire-saving incremental type hardware. The unit has a regenerative processing unit with a 20 Ohms resistor. The remote operator helps to change the parameters by dividing the encoder signal pulses based on preferences. The Amplifier is a part of motors used in take-up machines, robots, roll feeders, and more.

The PZ0A050AR31P00 has an inbuilt circuit that prevents the rush current from flowing into the main circuit. It incorporates an overtravel stop signal to prevent the motor in which it is used from getting damaged because of run-away or exceeding operational limits. The standard type device comes with the position control set when it is shipped. It also helps to control the torque and speed. The unit supports changing parameter values to toggle between normal and reverse commands. It features an I/F conversion unit for communication with personal computers. The short bar provided along with the amplifier must be removed if you are planning to use an external regenerative resistor.

The amplifier works at 200VAC operating voltage. The device features an electronic gear to set the movement for each pulse of position command to a specific value. This movement can be changed later without making any alteration to the mechanical gear. The Servo Amplifier has TUV Recognition and CE Certification. It comes along with two connectors for establishing connectivity.  The unit supports connectivity to a remote operator for checking its internal state and setting various parameters. The Amplifier allows a maximum 50m wiring distance between the motor and itself when application cables are used. It offers soldering type connectivity for absolute encoders and wire-saving incremental encoders.