VAC-MML11-7.5R-156T

Product Description

The VAC-MML11-7.5R-156T is a one of the latest productions of Okuma, it is a synchronous industrial motor that can be configured to support the operations of a wide range of industrial machines such as metal forming machines, food productions machines and lots more. This industrial motor also contains a high metal content this makes it possible for industrial operators to recycle the motor when it is no longer needed as an industrial motor. The VAC-MML11-7.5R-156T industrial motor is a brushless device, this means it operates with a higher amount of efficiency and with reduced noise. Although this industrial motor is designed to be absolutely safe for industrial operators, operators should ensure the motor is operated with the right configuration parameters as the wrong handling of the controller can cause the dangerous movement of the motor in the servo system.

The VAC-MML11-7.5R-156T industrial motor features a completely closed motor design, this makes it possible to operate the controller under adverse environmental conditions. The rotor windings of the motor are specially designed with an efficient heat dissipation mechanism which allows the motor operate with a high overload capacity. The motor also operates with an electronic commutation which makes it possible for it to undergo continuous start-stop operation at a high repeat frequency.

The permissible temperature range for the operation of this industrial motor falls between 0 to about 40 degree Celsius, however if the motor is to be kept for future operation, then it can be stored at a temperature as high as 80 degree Celsius. The VAC-MML11-7.5R-156T connects to the drive controller through two major cables; the power cable and the motor feedback cable. These two cables must be separately wired to prevent electrical interference.