MIV0202-1-B1

Product Description

Okuma thrives in manufacturing high-quality mechanical products. The company utilizes the single source philosophy meaning that it manufactures all its components and machinery that it then sells to its consumers. With highly integrated and technologically advanced systems, Okuma is able to manufacture dynamic servo motors that accommodate diverse applications. Below, we provide some important information regarding the MIV0202-1-B1 inverter model for optimum performance, enhanced durability, and prevention of injury.

The MIV0202-1-B1 needs a considerably higher voltage on the terminal blocks on the upper and lower side. For enhanced efficiency, you should not remove the plastic lid on the terminal blocks when the power is on. When you want to remove this cover, first switch off at the power source and wait to follow the procedure listed below. For the upper terminal block plastic lid removal, push the cork lightly, turn the cover for about 10 degrees to the front and then remove the lid by pulling it upwards. For the plastic cover on the lower terminal block lid, lightly push the lock, turn the cover 10 degrees in front and you may take off the plastic cover upwards.

The display on the MIV0202-1-B1 unit is your information center. When the display shows either the OPS error, control board error or the control voltage error, the corrective action to take is to replace your MIV0202-1-B1. However, for the control power supply error and encoder power supply error, no immediate corrective action is expected. Other errors that necessitate the change of the MIV0202-1-B1 include the gate signal error, motor over current error, 1R1 main error loop, access error, 31 NMI interruption, general illegal command, IRQ4 interruption, 28 parity error, and the slot illegal command.