Product Description
Okuma is a famous corporation that excels in manufacturing computer control systems, encoders, machine tools, drive controllers and motors. The over a century old company utilizes advanced technology that is highly innovative and reliable to manufacture high-quality products that meet the needs of the users. In this, we elaborate on how to maintain the MIV0101-1-B1 for enhanced performance and increased durability.
The MIV0101-1-B1 as a model of inverter unit requires certain current specifications during maintenance. Failure to follow the instructions may result in the user’s injury or damage to the device. The MIV0101-1-B1 requires a DC power supply connected to provide 24 VDC as power control and 300VDC. This model communicates using the encoder link, servo link and the converter link with the peripherals.
There are usually two units that are; two axis specification that controls two motors and the one axis specification that controls one motor. The control board of the MIV0101-1-B1 is inbuilt and it is mostly used for motor control that controls the spindle motor and an axis drive motor. If you have more than one MIV0101-1-B1 inverter units, you can connect them to the same DC power supply. In most situations, you will use one axis specification inverter and for optimal performance, the appropriate motor capacity is 2.4 hp (1.8KW).
Even with the best maintenance routines, you will someday need to change the MIV0101-1-B1. Since it has a capacitor with high capacitance, you will need to shut down the power until the lamp that indicates charge goes off. Then wait for a minimum of two minutes after the lamp is off to change the MIV0101-1-B1. After this, you may set the Controller ID number found of the manual.
Wake Industrial Warranty
