MIV22-1-B1

Product Description

The MIV22-1-B1 is an Okuma inverter system. It has a rated continuous output capacity of 22 kilowatts or 30 Horsepower. The approximate weight of the device is 11.2 kilograms. The approximate dimensions of the inverter are 380 x 150 x 325 millimeters. The XT1 terminal block with four termination points is located on the front panel. M6 size screws are required for wiring termination. The XT2 block terminal with five termination points is also located on the front panel. M6 size screws are required for wiring termination. A 7-segment LED display is also provided on the front panel and enable monitoring of operating status. Error codes are display on the LED display for facilitation of troubleshooting. A controller ID has to be assigned to each inverter unit. Okuma has provided a 5-bit switch on the front panel that can be used to set the controller ID.

The MIV22-1-B1 is rated for 300 Volts DC input. The DC power to the inverter is supplied by an Okuma power supply that requires 200 Volts AC input. The power supply also provides a separate 24 Volts DC input for the control electronics on the inverter unit. The power input to the inverter should be disconnected before any connections are made. The inverter should be allowed sufficient time to discharge completely before any maintenance activities are performed. Failure to follow these precautions can result in equipment damage or injury to personnel. The MIV22-1-B1 features an ICB1 control unit that enables motor control functions. The type of control ROM on the unit is 1. The MIV22-1-B1 can be used for control of BL and PREX series motors. The MIV22-1-B1 should be installed by trained professionals.