Product Description
The E4809-436-002-A power supply board offered by Okuma features six axes. This board is an integral component of the manufacturer’s DCPS-1 and DCPS-2 DC power supplies with an 80A current rating and 200V voltage rating. These power supplies are used with the manufacturer’s CNC machines. The product acts as a basic essential interface to regulate as well as supply power to the components connected to it. The accessory encompasses a female barrel jack connector that functions as an input terminal. The unit also has multiple terminal blocks for the connection of its components with the breadboard wires. It converts the AC line voltage to the required voltage for the operation of the CNC machine.
The board weighs 0.45kg. The product encompasses almost all the components that help in supplying power to the device it is used in. The accessory comprises a block rectifier or four diodes, a transformer and a couple of capacitors for filtering. The unit portrays a very easy installation process. Its rugged design makes it suitable for deployment in advanced subsystems. This power supply board functions using an incoming voltage that is supplied by a battery. This voltage does not have to be changed or rectified. The board features backup support for one year and is sent through a well-known logistics network.
The product encompasses circuits that must be protected against surge or overload. This protection is ensured by incorporating a fuse in the circuit. The fuse may or may not be replaceable by the user. A power supply board is an important component of an electronic device. The accessory is located inside the enclosure of the related power supply. The unit typically has red, amber and green colored LEDs to indicate different states. The red light in the board lights up when it senses a stop signal while the green light gets illuminated when it receives incoming power.
Wake Industrial Warranty
