Product Description
The DC-S1A DC power supply from Okuma is used with the six-axis servo drive of the same manufacturer. This power supply has a size of 21 x 48 x 11cm (H x L x W). The product weighs 7kg. The device is connected to the servo drive by means of leads. These leads are inserted into the panel of this power supply. Its front panel can be used to set the current or voltage levels for checking. The unit offers direct current voltage for powering the servo drive. This DC power supply checks if the drive works as intended by setting and supplying specific voltages.
This power supply has two major power inputs comprising an AC input and a DC input. The AC input is often rectified and filtered to generate a DC voltage. The DC input is generally a DC voltage with a rating of 5V, 12V, 24V or 48V. The power supply is often generated from an AC line. This is why the product is also referred to as an AC to DC power supply. This device has two wires with a negative charge and a positive charge. It features a rectifier as its key central component. This rectifier helps to convert the alternating current to direct current and separate the negative current from the positive current.
The output from the DC power supply provides a fixed DC voltage across the load. The product also incorporates a transformer, a regulator and a filter as its other major components. The transformer helps to step up or down the provided supply voltage according to the requirements of the connected servo drive. The filter lessens the AC components from the rectifier output voltage while the regulator offers protection against short circuit, overvoltage and thermal shutdown. This DC power supply can be sent internationally with a one-year warranty.
Wake Industrial Warranty
