Product Description
The BL-MC25E-30SB is a servo motor. It is manufactured by Okuma. The motor can be used for industrial applications. It is used in combination with a compatible drive controller such as one belonging to the MIV3 or MIV5 product line. The output rating of the BL-MC25E-30SB is 0.75 kilowatts. The rated motor speed is 3000 RPM. The stall torque motor rating is 2.7 Nm. The voltage rating for the motor is 133 Volts and the current rating is 3.34 Amps. The motor requires three-phase AC input. The motor frequency is 200 Hertz. The insulation class of the motor is F. The BL-MC25E-30SB is an 8-pole motor. An integrated Okuma ER-FC-2048D encoder is provided on the motor. The encoder measures motor speed and torque, and sends this information to the drive controller, which modifies its output to bring motor parameters in-line with programmed parameters.
The BL-MC25E-30SB motor should be installed as per the installation instructions that are provided in the product manual. All relevant safety instructions should be followed to prevent equipment damage and injury to personnel. The BL-MC25E-30SB motor should only be used for applications that are specified by Okuma. Use of the motor for applications that are not specifically permitted by the manufacturer can lead to equipment damage and injury to working personnel. Okuma will not accept any liability for damages or injuries occurring due to improper use of its products. The BL-MC25E-30SB motor should be used under the operating and ambient conditions that are specified in the product documentation. Only approved spare parts and accessories should be used with the motor. Only qualified technical personnel should handle and install the BL-MC25E-30SB motor and associated equipment.
Wake Industrial Warranty
