Product Description
Designed to produce 1/4 HP maximum power the SR3624-8291-7-56BC-CU is a permanent magnetic direct current (PMDC) motor from KOLLMORGEN. This motor requires 90 VDC to operate and you can couple it with an appropriate SCR. The SR3624-8291-7-56BC-CU is widely used in low-speed applications as it can rotate at a maximum speed of 1750 revolutions per minute. Users can deploy this model in various industrial fixtures as its base can easily be dismantled. This DC motor consumes around 2.7 amperes of current while operating at its maximum speed and generates 9.0 lbs.-inch of continuous torque.
The SR3624-8291-7-56BC-CU has a torque constant of 3.9 lb.-in/A. the shaft of this motor comes without any pulley and can be coupled to a broad range of loads as required by the user. You can consider this motor for connecting to an induction gearbox for your high-speed applications. This model can be operated at variable speed through an appropriately rated SCR type controller. The SR3624-8291-7-56BC-CU is provided with the NEMA 56C type front plate.
The enclosure of this motor is fully closed and non-ventilated. This model comes with high quality, field-replaceable brushes. For brush replacement, you will not need complete dismantling of the motor as it offers direct access to brushes through the body. KOLLMORGEN SR3624-8291-7-56BC-CU comes with a rugged, fused commutator. Commutator fusing is a known method for increasing the reliability of DC electric motors and this process requires state-of-the-art technology and high-level expertise. The foundation of this motor can easily be removed by the user if required. The cable conduit box of the SR3624-8291-7-56BC-CU motor is designed to control the ingression of moisture and other debris. A specially designed gasket is used for the proper sealing of the conduit box.
Wake Industrial Warranty
