Product Description
The SP10600-443B2 is a state-of-the-art industrial servo drive designed by Rexroth Indramat to control synchronous motors used in the industrial servo system. This servo drive carries out its control operation by translating the lower power command signals it receives from the controller into high power voltage and current required to generate the expected output from the motor. This industrial servo drive is a sophisticated device that operates in three major modes: direct transistor control, the two-phase analogue current command input, and a six-step motor excitation. The SP10600-443B2 industrial controller is also designed to be environmentally friendly; its operation does not lead to the emission of a high amount of sound pollution and is manufactured with materials that contain a high metal content; thus, it can be easily recycled after its usefulness had been exhausted.
The SP10600-443B2 industrial servo drive is designed with an enclosure that meets the IP20 protection category; this enclosure is also specially structured to allow for the direct installation of the drive into the industrial servo system. The input voltage required by this servo drive for optimum operation falls between 115 to about 360 volts; also, under normal operating conditions, the SP10600-443B2 industrial servo drive operates with an input power of about 1.96 to 4.34 volts per amperes. The SP10600-443B2 industrial controller is designed with an air bower that helps regulate the heat generated in the housing unit of this device; this blower can dissipate an internal heat of about 120 watts away from the servo drive under normal operating conditions.
The control, installation, and general operation of this servo drive is fairly direct and easy; thus, a high level of technical ability is not required to operate the drive. However, the operating instructions stated in the user manual of the servo drive must be strictly followed.
Wake Industrial Warranty
