Product Description
The SP10600-402B2 is an industrial servo drive manufactured by Kollmorgen to carry out the accurate and precise control of the industrial motors used in industrial production system. This device is a flexible device renowned for its ability to stimulate industrial motor to operate over a braod speed range and to operate in industrial conditions considered unfavourable for convectional drive controllers. The SP10600-402B2 contains special sensors that allow it to dectect and independently correct any operational error; thus, it is perfect for industrial machines that require high precision and motor feedback control for effective operation. Special waring signs and symbols are inscribed in the housing of this servo drive to draw the attention of the industrial operators to parts of the drive that are capable of cause accidents and that require special configuration application.
The SP10600-402B2 is also a const effective servo drive; under normal operating condition, the servo drive can operate with an input power that falls between 1.96 to 4.34 and an input voltage of about 300 volts. The continuous power output generated by this servo drive is about 1.6 kilowatts, while the rated current supplied by the controller to the servo motor is about 10 amperes. The servo drive can also supply the motor with a rated current as high as 20 amperes for about 2 seconds. The SP10600-402B2 industrial controller connects to the industrial motor using two main electrical cables; the power cable and the motor feedback cable. These two cables must meet the international quality standard and be well shielded to reduce electrical interference in the servo system.
The permissible temperature range at which this servo drive should be operated falls between 0 to 45 degrees celius, while the maximum installation height for this drive is 1000 meters above sea level.
Wake Industrial Warranty
