Home Kollmorgen SE2000 DC Motor Controller Series SE2302

SE2302

Name: SE2302
Brand: Kollmorgen
Price: 469 USD
Rating: 4.6 (27 reviews)

Straightforward Pricing: No Rush Fees, No Credit Card Fees

Call for Expedited Shipping and Product Condition Options

The SE2302 is part of the SE2000 DC Motor Controller Series retired by Kollmorgen. The SE2302 features an input line voltage of 115 VAC 1 Phase 230 VAC and an AC line input of 115 or 230 V +/- 10%. This DC Motor Controller has a 50/60 Hz +/-2 Hz, Single Phase AC line frequnecy and a Max loading capacity of 150% for 1 minute

Preparing your secure checkout page...

Description
Revisions
Specs
FAQ

Product Description

The SE2302 is a motor controller. It is manufactured by Kollmorgen and belongs to the SE2000 product line. A number of models are available as part of the SE2000 product line. The SE2302 is a reversing-brake model controller and is designed for chassis mounting. The reversing brake controllers include forward and reversing contactors with anticlogging and dynamic braking. The controller is designed for controlling 0.25 to 1 Horsepower rated DC motors at 115 Volts AC and 0.5 to 2 Horsepower rated motors at 230 Volts AC. The power supply on the controller can tolerate a ±10% variation in the input supply. A disconnect switch should be used between the AC supply and the controller input. A controller has a AC line circuit breaker for line protection.

At 115 Volts AC input, the DC output voltage is 0 to 90 Volts DC for the armature and 50 / 100 Volts DC for the field. At 230 Volts AC input, the DC output voltage is 0 to 180 Volts DC for the armature and 100 / 200 Volts DC for the field. As a chassis mount controller, the maximum temperature for operation of the SE2302 is 55 degrees Celsius. The relative humidity in the vicinity of the controller should not be allowed to exceed 95%. The altitude of the installation site for the controller should be less than or equal to 3300 feet. The SE2302 should be mounted vertically. Operation and maintenance should only be performed by trained personnel. The main power feed must be disconnected before any maintenance is performed on the SE2302 controller. Service factor for the SE2302 controller is 1.0. The duty for the controller is continuous.

SE2302 Technical Specifications

Protection class:	IP20
Dimension:	8.5×5×7.25in
AC line input voltage :	115 or 230V
AC line frequency:	50/60Hz
service factor:	1
Duty :	Continuous
Maximum load capacity:	150% for 1 minute
Line protection :	Circuit Braker
Maximum permissible installation height:	1000 meters above sea level
Service factor:	1

Frequently Asked Questions about SE2302

Q: Does the SE2302 motor controller require testing upon delivery?

A: The SE2302 is tested by industrial professionals before shipment, and it is shipped in good condition. Opertors do not need to subject the controller to rigorous tested before usage.

Q: What features of the SE2302 controller can be selected during the configuration.

A: In order to meet the industrial requirements specific industrial applications, operators can select special features of the SE2302 controller. Some of these selectable features include the current scaling, acceleration/deceleration time, AC supply, Feedback, and current scaling.

Q: How should the SE2302 motor controller be installed?

A: The SE2302 controller must be mounted in a vertical position. This orientation permits the required cooling of heat sinks. The side or inverted installation of the motor controller is not permitted.

Q: Can the SE2302 motor controller be used in harsh environmental condition?

A: Despite the compact design of the housing of the SE2302 motor controller, operators should avoid installing the controller in harsh environmental conditions. The controller should be installed away from dust, dirt and extreme vibration.

Q: Is the SE2302 covered by a warranty?

A: Yes. The SE2302 motor controller is covered by a 12 month warrnty is it is bought from our store. The warranty will cover any damage that occure on the proper use of the controller.