Wake Industrial LLC is not an authorized distributor of this product.

S7720C-2CF2-F2

  • Rated 4.2 (9 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees

Current response time:

5 Minutes 2 Seconds

The S7720C-2CF2-F2 Kollmorgen digital servo amplifier has 2CAN and fan controller expansion cards. This servo amplifier supports a maximum ambient operating temperature of 40 °C. It comes with Ethernet connectivity onboard.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The S7720C-2CF2-F2 Kollmorgen digital servo amplifier is equipped with three phases. This servo amplifier has a rated supply voltage of 3 x 208 to 480 VAC with a tolerance of +/-10%. The product has a dual channel STO function. This device is meant to be wired using 60 °C /75 °C copper wires. The unit can be implemented in residential areas or commercial premises only after additional filter measures have been incorporated. It may be needed to account for ventilation so that the ambient temperature inside the enclosure is not exceeded. This amplifier can be supplied from single-phase or triple-phase grounded industrial supply networks.

The product should be used with a mains choke if the mains voltage asymmetry is more than 3%. This device has not been evaluated by the manufacturer for DC input power for single and group installations. The unit controls the holding brake of a motor. It helps to drive a motor with closed-loop control of torque, position, and/or speed. This amplifier should not be used in potentially explosive environments.

The product must not be commissioned if the machine in which it has been installed fails to comply with the EC machinery directive requirements. This device must not be subject to impermissible stresses. The unit is mounted vertically inside its control cabinet. Its components should not become bent when it is being transported and/or handled. This servo amplifier is fitted with a coldplate using six M5 hexagon socket screws as per ISO 4762 specifications. This product must have sufficient clearance above and below it inside the switchgear cabinet.

S7720C-2CF2-F2 Technical Specifications

Product Group: S700
Nameplate: Yes
Leakage Current: More Than 3.5 mA
Ethernet Connectivity: Yes
Switch Cabinet Size: Small
Slot 2 Expansion Card: Fan Controller
Height With Fan: 190 mm
Width: 190 mm
Pollution Level: 2
Solid State Motor Overload Protection: Yes

Frequently Asked Questions about S7720C-2CF2-F2


Q: Which connector of the S700 amplifier is used to achieve a restart lock-out for functional safety by using the STO enable inputs?

A: The X4 connector of the S700 amplifier is used to achieve a restart lock-out for functional safety by using the STO enable inputs.

Q: What kind of digital outputs does the S700 amplifier have?

A: The S700 amplifier has floating outputs.

Q: How is the S700 amplifier connected to a PC?

A: The S700 amplifier is connected to a PC by using the RS 232 interface and an appropriate cable.

Q: What must be done before inserting or removing the memory card from the S700 amplifier?

A: The S700 amplifier must be switched off before inserting or removing the memory card from the S700 amplifier.

Q: What type of built-in protective measures does the S700 amplifier have?

A: The S700 amplifier has built-in protective measures such as shielding and insulation.

Internal Product Review

  • ‘‘S7720C-2CF2-F2 digital servo amplifier has a fan controller and Ethernet connectivity onboard.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo