Product Description

The S7480F-PNF2-NA digital servo amplifier from Kollmorgen comes with a fan controller in the second slot. The device may cause danger of electrical arcing when its connectors are disconnected when there is an active power supply. The servo amplifier can be set up with the help of the DRIVEGUI.EXE software. Its parameters can be set online by people with relevant expertise. This amplifier must be matched with the correct motor by comparing their rated currents and voltages. The unit has a current rating of 48 Arms and a voltage rating of 208 to 480 V. The S700 servo amplifier relies on a three-character LED display to indicate its operating status. The device can be connected with an electrically isolated external 24 VDC auxiliary power supply through an isolating transformer. The rated input power of the device for continuous operation is 35 kVA. The servo amplifier has a peak output current of 96 Arms for approximately 5 seconds with a tolerance of +/- 3%. The maximum noise emission of the device is 62 dB(A). The product weighs 13 kg and has a width of 190 mm. The ambient operating temperature of the S700 servo amplifier is between 0°C and 40°C. The device can be mounted in a vertical position. The product comes with a built-in fan for ventilation. A 24V holding brake in the motor can be directly controlled by the servo amplifier. A special 24V supply voltage (X9B) is used. The device can directly control brakes with up to 3A. The unit features the functional safe restart lock STO, which secures the drive in standstill mode using its internal electronics so that even when power is being supplied, the drive shaft is protected against unintentional restart.