Product Description

Kollmorgen is an American company that has been in operation for more than 100 years. The company specializes in the production of excellent industrial motion and motion control devices such as servo motors, drive controllers, servo amplifiers, control modules, and lots more. The S7480F-NANA-S3 servo amplifier is one of the productions of the Kollmorgen. The servo amplifier is designed exclusively for the driving of suitable brushless synchronous servo motors, asynchronous motors, and DC motors. The servo amplifier carries out the accurate control of the torque, speed, and position of these industrial motors. The servo amplifier is intended to be built into electrical plants or machines, and can only be operated as integral components of such plants of machines. Although the housing of the servo amplifier already provides protection that meets the IP20 protection class, the S7480F-NANA-S3 servo amplifier should also be installed in an additional closed control cabinet. The S7480F-NANA-S3 servo amplifier can be supplied from 3-phase grounded industrial supply networks such as the TN-system and TT-system with grounded neutral point. Connection of the servo amplifier with other types of supply networks is possible, however this might require the use of an isolating transformer as described in the documentation of the device. The S7480F-NANA-S3 servo amplifier features a memory card slot where information such as the firmware and a full set of parameters can be stored. MMC and SD card are supported by the servo amplifier. The S7480F-NANA-S3 servo amplifier operates with a rated supply voltage of 208 to about 480 volts, also the rated input power of the servo amplifier for continuous operation is 35 kilovolts per ampere. The S7480F-NANA-S3 servo amplifier also has a total weight of about 13 kilograms.