Product Description

The S7480F-EIF2-NA digital servo amplifier manufactured by Kollmorgen is designed for use in high-power electrical machines. The unit has a very hot surface when it is live. The device must be handled only as intended by the manufacturer and only after reading the associated documentation. The servo amplifier must be grounded properly. If it is not grounded as it should be, it can cause danger of serious injury or electrical shock to the personnel. The equipment does not ensure functional safety with the brake function. The S700 servo amplifier uses the STO function to block the trigger pulses of the power transistors. The device related technical details and certifications along with a 2D bar code and its type code are mentioned on the nameplate. The product has an I/O extension card in the first slot and a fan controller in the second slot. The unit is fully programmable through the RS232 serial interface. The rated line power of the device for S1 operation is 35 kVA. The servo amplifier has a rated DC link voltage of 290 to 675 V. It has a peak output current of 96 Arms. The servo amplifiers should be safely earthed to the PE (protective earth) busbar in the switch cabinet. There is a high risk of electric shock. It is important that low-resistance earthing is made to guarantee personal protection. The user should not modify the device without permission from the manufacturer. If the user opens the housing, it causes a loss of warranty and all certificates become invalid. Warning signs are added to the housing of the servo amplifier. If these signs are damaged, they should be immediately replaced.