Product Description

The S7480F-2CF2-S3 is a digital servo amplifier designed by Kollmorgen for control of the speed, torque, and position of synchronous, asynchronous, and DC motors. This servo amplifier is a modular device should be operated as integral parts of electrical plants or machines. The amplifier is designed according to the IP20 protection class and must be operated in a closed control cabinet that can provide additional protection and preserve permissible ambient conditions around the servo drive. The S7480F-2CF2-S3 servo amplifier is intended for use in industrial areas, however it can also be used in residential and commercial environments although this will require the operator to implement additional filter measures. This servo amplifier falls under the overvoltage category III can be supplied from three-phase grounded industrial supply networks such as the TN system, and the TT-system with grounded neutral point. The S7480F-2CF2-S3 servo amplifier has not been evaluated by Kollmorgen, UL, or TUV for replacing AC mains input with DC input, users who which to operate the servo amplifier with DC input must evaluate the DC installation for branch circuit protection, wire size, wire voltage rating, current rating, fuse protection, and system dielectric requirements. The built-in EMC filters might not work with DC supplied drives, the user is responsible for keeping the conducted emissions and the immunity of the drive within the required noise levels. The S7480F-2CF2-S3 servo amplifier has a current rating of 48 amperes, and a voltage rating that falls between 208 to about 480 volts. It can also support resolver, encoder, AquadB encoder, and Comcoder-evaluation. The rated output current of this servo amplifier is about 48 amperes, while the peak output current is as high as 96 amperes.