Product Description

The S7480F-2CF2-NA is a reliable and versatile digital servo amplifier from the house of Kollmorgen. The device has three slots. The first slot is intended for the 2CAN expansion module, and the second slot houses the fan controller. The 2CAN expansion module provides the interfaces on separate Sub-D connectors. The two CAN connectors are wired in parallel. A termination resistor (120 Ohm) for the CAN bus can be switched into the circuit if the servo amplifier is at the end of the bus. The rated input power of the S700 servo amplifier for continuous operation is 35 kVA. The current rating of the unit is 48 Arms and its voltage rating is 208 to 480 V. The product has a rated DC bus link voltage of 290 to 675 V. The peak output current of the device for approximately 5 seconds is 96 Arms with a tolerance of +/- 3%. The servo amplifier weighs 13 kg. Its width is 190 mm. The ambient operating humidity of the device is 85% without condensation. There is a 3-character LED display on the S700 servo amplifier that indicates the status of the device after switching on the 24V supply. When the keys on the front panel of the amplifier are used, the parameter and function numbers are shown, as well as the numbers for any warnings and errors that may occur. The unit can directly control a 24V holding brake in the motor. A special 24V supply voltage (X9B) is used. It can directly control brakes with up to 3A. The product features a Stop function that is used to shut down the machine in normal operation. The Stop functions are defined by IEC 60204 specifications.