Product Description

The S7480A-PNF2-F2 is one of the most advanced productions of the reputable Kollmorgen company. It is a digital servo amplifier that improves the operation of industrial machines by carrying out the accurate control of the speed, position, and torque output of servo motors. This amplifier can also control the temperature of connected motors. The S7480A-PNF2-F2 servo amplifier is designed to be used exclusively with brushless synchronous, asynchronous, and induction servo motors, it features a modular design and does not require any maintenance operation. The amplifier is designed according to the IP20 protection class, however before operation it should be installed into an additional closed control cabinet that can provide a protection that meets at least the IP54 class. The S7480A-PNF2-F2 servo amplifier is delivered with a DRIVEGUI.EXE setup software, the software can be used to configurate the amplifier and adjust its operation to specific industrial applications. Configuration of the amplifier with this software requires a PC that features at least a Pentium II processor, a windows compatible graphics adapter, a hard disk with at least 10 MB free spaces, and one free serial interface. This servo amplifier requires a rated input voltage of 208 to 480 volts, it also requires a rated input power of 35 kilovolts amperes for continuous operation. The permitted switch on and off frequency of this servo amplifier is about 30 1/h while the DC bus link voltage falls between 290 to 675 volts. The S7480A-PNF2-F2 industrial servo amplifier generates a rated output current of 48 amperes, this output current can be as high as 96 amperes. The switching frequency of the output stage of this servo amplifier is 8/16 kilohertz. The amplifier has a total weight of 13 kilograms.