Product Description

The S7480A-NANA-PM is a state-of-the-art digital servo amplifier designed for brushless synchronous, asynchronous, and DC servo motor designs. This amplifier is a maintenance free device that is well suited for the accurate control of the speed, position and torque output of industrial servo motors. The servo amplifier is designed by the reputable Kollmorgen company, it features a modular design and is certified to be safe for industrial applications. This amplifier can also be used in residential or commercial areas, however this will require the user to implement additional mains filter measures. The amplifier belongs to the overvoltage category III, it can be supplied from a 3-Phase grounded industrial supply network such as the TN-system, and the TT-system with a grounded neutral point. The use of the S7480A-NANA-PM servo amplifier in potentially explosive areas, environments with corrosive or electrically conductive acids, ships, offshore applications and on non-grounded supply networks is prohibited. The amplifier can be used to control holding brakes in industrial motors, although the control of holding brake by the amplifier alone should not be used in applications where functional safety is to be ensured with the brake. The rated supply voltage required by the S7480A-NANA-PM servo amplifier falls within the range of 208 to about 480 volts, also this amplifier requires a rated input power of 35 kilovolts ampere for continuous operation. The rated output current generated by this servo amplifier is around 48 amperes, while the peak output current is about 96 amperes, The S7480A-NANA-PM servo amplifier contains a built-in air blower that dissipates heat away from the amplifier via forced ventilation. The maximum noise emission generated by this amplifier during operation is 62 decibels.