Wake Industrial LLC is not an authorized distributor of this product.

S30661-FB

  • Rated 4.4 (21 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees

Current response time:

4 Minutes 7 Seconds

The S30661-FB digital servo amplifier is manufactured by Kollmorgen. It is designed exclusively for brushless synchronous motors and can carry out the accurate closed loop control of torque, speed and position of the motor. The Servo amplifier is flexible and is delivered with a DRIVE.EXE setup software that can be used to adjust its operation to meet the requirements of a wide range of applications.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The S30661-FB servo amplifier is a Kollmorgen product designed for the closed loop control of the speed, position, and torque output of brushless synchronous motors. The servo amplifier is designed to maintain the highest standards of operational efficiency as safety, before it is delivered, it is tested and certified to meet these operation standards. The housing of this industrial servo amplifier meets the IP20 protection class, the amplifier is however still required to be operated in a closed control switchgear cabinet that can preserve permissible ambient conditions around the amplifier. The S30661-FB servo amplifier can be connected directly to symmetrically earthed three-phase industrial supply netwoks such as the TN-system, and the TT-system with earthed neutral point. Connection to different mains supply networks is also possible. The S30661-FB servo amplifier requires a rated supply voltage that falls between 110 to 230 volts, also the rated installed load for the continuos operation at 230 Volts is about 2.4 kilovolts. During operation, the rated output current delivered by the servo amplifier falls between 6 to 8 amperes, also the amplifier can generate a maximum output current of about 15 amperes. The noise pressure generated by the servo amplifier is about 60 decibels. The proper mounting, installation, and configuration are important to the functioning of this servo amplifier, only well trained engineers should be allowed to carry out these operations according to the instructions stated in the documentation delivered with the device. The servo amplifier has a length of about 230 millimeters, a thickness of 70 millimeters and a height of 246 millimeters. Also, the total weight of the amplifier is about 2.7 kilograms. The maximum permissible installation height for the S30661-FB drive controller is 1000 meters above sea level.

S30661-FB Technical Specifications

Protection class: IP20
Weight: 2.7Kg
Current Rating: 6A
Voltage Rating: 110…230V
Expansions: Fb-2t01
Multi-feedback support: Present
Number of analog inputs : 2
Overvoltage category: III
Slot for expansion card: Present
Intelligent position controller: Present

Frequently Asked Questions about S30661-FB


Q: How does the S30661-FB communicate errors to operators?

A: Any errors that occurs during the operation of the S30661-FB servo drive are shown in a coded form by an error number in the LED-Display on the front panel.

Q: How can operators reset faults generated by the S30661-FB servo amplifier?

A: Faults can be reset by hardware reset of the servo amplifier or by ACII command "CLRFAULT". Only qualified personnel should be allowed to do this.

Q: Is the expansion card integrated into the S30661-FB servo amplifier upon delivery?

A: Yes. The S30661-FB servo amplifier is deliverd with the expansion card already inserted into the expansion slot of the servo amplifier and screwed in place.

Q: What additional feature does the FB-2to1 provide to the S30661-FB?

A: The feedback extension card (Ft-2o1) enables the simultaneous connection of a digital primary and of an analog secondary feedback into the connector X1. The supply of 24V DC auxiliary voltage to X33 is converted on the extension card into a precise 5V DC encoder supply for the secondary feedback

Q: What type of motor design is compatible with the S30661-FB servo amplifier?

A: The S30661-FB servo amplifier is intended to be used exclusively with brushless synchornous motors. It is recommended that Kollmorgen motors are used with the amplifier.

Internal Product Review

  • ‘‘I love how easy it is to install and use this servo amplifier. It is simply amazing. ’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo