H2HNRFA-LNN-NS-00

Product Description

The H2HNRFA-LNN-NS-00 motor finds its place among the list of several hybrid stepper motors from Kollmorgen. The size 2 motor has a NEMA 23 circular frame and a half rotor stack. The unit operates at a temperature range of -20°C to +40°C. The device features a 0.011Nm detent torque. It comes with two phases or windings. The device has NEMA mounting configuration with leadwire connection style and regular construction. The hybrid motor has eight leads with additional standards winding type. The unit encounters some leakage of flux during its operation. The device supports the mounting of radial and axial loads on its shaft.

The stepper motor moves in very small and precise increments. The stepping action can be controlled easily without using expensive or complicated feedback devices. The unit delivers high torque with low loss in a compact size. The round flange has a 2.25 inches diameter. The fast operating motor helps in lowering the system cost and consumes less energy. The large bearings feature long life and support direct load mounting on the motor shaft without load support bearings or couplings. It has an IP40 protection rating and a smooth single shaft without any seal. The device comes with a one-year warranty period. We can send the motor to your address safely, through our reliable delivery partners.

The hybrid motor features a laminated rotor and a high voltage inset molded insulation system surrounding the stator. The performance of the device depends on the voltage and current provided through a drive. The unit is compatible with different types of drives. The motor encompasses 340VDC insulation voltage rating and 100 megaohms insulation resistance. It has a maximum length of 1.56 inches. The lead wires have #22AWG thickness and 12 inch minimum length.