CR06703

Product Description

Kollmorgen designs and develops the latest motion control technology in its products such as servo amplifiers, brushless servo drives, and frequency converters.

The CR06703 model is highly recommended by our international clients due to its high performance and reliability. The model is developed to control the functions of a servo motor manufactured by Kollmorgen. The servo amplifier should only be mounted with the devices approved by the supplier. The model consumes the nominal voltage of 110 – 230 V (±10%) and the nominal current requirement of the unit is 6 A. The continuous power delivered by the unit while operating at a 115 V, single-phase and three-phase, connection is 0.7 kVA and 1.1 kVA. The servo amplifier can bear the maximum temperature of 80 degree Celsius and the permissible operating temperature for this unit is +5 to +45 degree Celsius. The unit is completely protected from over/under voltage effect and it can be stored at the maximum temperature of +70 degree Celsius. While operating at a single/three-phase connection the model consumes the maximum current of 20/15.6 A for a maximum of 2 seconds. 15 line fuses are installed in this unit.

The model CR06703 dissipates the maximum heat of 80 W and the phenomenon of natural convection is used to maintain the internal temperature of the unit. The maximum surge current for soft-start operation is 30 A. The amplifier should be operated according to the parameters specified in the user manual. To monitor the shaft position, single or multi-speed resolver feedback is placed in this unit and the maximum length for resolver feedback is 22.9 meters. The servo amplifier can be configured by using the MOTIONLINK software.