CR06200-000000

Product Description

Kollmorgen manufactures reliable and long-lasting industrial automation devices such as servo amplifiers, inverter modules, and power supply units.

The CR06200-000000 model is a servo amplifier and belongs to the SERVOSTAR CD system. The model is manufactured by Kollmorgen as is widely used in various domestic, commercial, and industrial sectors. The servo amplifier is designed to be installed in the switchgear metallic control cabinet of appropriate protection. During installation, the minimum clearance of 12.7 mm should be maintained at the sides and 63.5 mm should be maintained at the top/bottom of the amplifier module. The servo amplifier is only used to operate the AC synchronous servo motors developed by Danaher Motion. The model can operate at a single-phase or three-phase 110 – 230 VAC power source with a line frequency of 47 – 63 Hz. To monitor the motor shaft position, the unit is equipped with either single or multi-speed resolver feedback. The input current requirement for this unit is 10/7.8 A for a single/three-phase power source. While operating at a single-phase voltage source, the motor generates the continuous power output of 0.89/1.8 A at 115/230 V. The model generates the rated power of 1.1/2.8 A at 115/230 V, while operating at the 3-phase power source.

The model CR06200-000000 comes with a PWM frequency of 8 kHz and the internal heat dissipation of the module is 80 W. The servo amplifier can be stored ideally under the temperature range of 0 to +70 degree Celsius and the ideal operating temperature range for this unit is +5 to +45 degree Celsius. The amplifier module is designed to operate under humid conditions with a maximum humidity range of 90%. The unit can be installed at 1000 m/sea level with 5% derating.