Product Description

The AKM74P-ACCNR-01 Kollmorgen synchronous servomotor encompasses a shaft seal. This product uses a resolver for its feedback. This device has increased mounting dimensions because of its fan. The unit must be transported from one place to another by making use of the lifting eyes present on its housing. It features Class 2K3 climatic category according to IEC 60721-3-2 / EN61800-2 specifications. This motor features screws that must be fully screwed in for its lifting eyes. The product should never be operated in a damaged state. This device features details such as the number of phases, standstill torque and current, rated speed, rated power maximum ambient operating temperature and protection rating on its nameplate. The unit has a 180 mm size flange with N accuracy and in accordance with IEC standard. It is important to set up the number of poles in the motor and resolver correctly in the supporting servo amplifier as an incorrect setting may result in the motor damage. This motor must be checked for compliance with the permissible axial and radial forces before it is put to use. The product assembly and wiring can be done only when it is in the de-energized state. This device should be grounded properly before it is operated. The unit can have dangerous voltage resulting from residual charge on its capacitors for 10 minutes after the power supply is turned off. Its wiring must be done as per the wiring diagram given in the installation and setup instructions for the servo amplifier used with the motor. This servomotor comes with five pole pairs. The product features a standard length as there is no holding brake and because of the standard resolver feedback option.