Product Description

The AKM73P-ACC2R-01 synchronous servomotor by Kollmorgen comes with a shaft seal around its keyway shaft. This product is noted for its exceptionally low cogging and low harmonic design. The device comes with an integrated fan and offers support for an add-on kit to incorporate forced ventilation. This unit must have at least 25 mm free space behind its fan guard for free airflow from the fan. It must be lifted using appropriate lifting tools and the lifting eyes available on the motor housing. The motor must be run without a coupled load only after removing the key fitted on the shaft. This product can be lifted horizontally as well as vertically. The device is meant to be lifted only after ensuring that the fastening screws of its lifting eyes are screwed in fully. This unit must be free of shocks, especially at the shaft end, when it is being transported. It is necessary for the servomotor to have no condensation on its surface at any point in time. The motor depicts a suspended load when it is in a raised state. This product should be checked for bearing noise after every 2500 hours of operation. The device related repair and interior cleaning can be done only by the manufacturer. This motor has an engraved nameplate on one side of its housing. It has a three-phase brushless design. The product is integrated with a resolver that is meant to be connected using the manufacturer's preassembled shielded cables. This device uses an aluminum plate of size 18 x 18 x 0.5 inches for its heatsink. The unit has a holding torque of 25 Nm at 120 °C for its holding brake. Its axial force must never be more than one-third of its radial force.