Product Description

The AKM73P-ACC2GK00 synchronous servomotor from Kollmorgen has a standard design with IP 65 protection class. This product is meant to be used only for industrial applications and can be installed only in such electrical machinery. The device must be inspected for visible damage if its packaging is damaged. This unit uses an optical multi-turn encoder with 4096 revolutions and 128 lines per revolution for its feedback. It depicts low harmonic distortion. The motor supports a plug-and-play action. This product is easy to commission and use. The device should have a proper grounding connection before it is operated. This unit portrays a peak torque of 985 Nm. Its windings are rated at a temperature of 100 °C. The servomotor encompasses ball bearings that need a replacement after 20,000 operating hours at rated conditions. The product has no hazardous substances in its construction that can harm the environment. This device is meant to be transported and stored in an area where the relative humidity is 5% to 95% without condensation. The unit has a nameplate on the side of its housing. This motor must be commissioned only by specialist personnel with extensive knowledge of electrical engineering. It has a high electric voltage of up to 900 V when it is in operation. The product tends to cause electric shock if its electric connections are undone in the live state. This device must be cooled to a temperature of less than 40 °C before touching it after its use. The unit setup should be undertaken only after ensuring that it has been assembled and oriented properly. Its holding brake is activated by a spring action.