Product Description

The AKM72P-ANCNDA00 synchronous servomotor manufactured by Kollmorgen has a nameplate on its housing listing the key technical details along with the number of phases and certification details. This product has a P type winding and a rotor length of 2. The device has a smooth shaft and no holding brake. The unit uses a shielded 7 x 2 x 0.25 sq.mm encoder cable and a round connector with 17 poles for the encoder connection. Its radial and axial loads at the shaft end at a speed of 1000 min-1 must not be more than 1300 N and 500 N respectively. This servomotor cannot be used without connecting the digital SERVOSTAR servo amplifier. The product must be wired only as per the wiring diagram given in the manual of the servo amplifier. This device has a phase-to-phase winding resistance of 0.35 Ohms and a phase-to-phase winding inductance of 5 mH. The unit has no brushes and is a DC motor that is meant to be used for demanding servo applications. It is not suitable for encapsulated mounting. This motor has no customization option and its encoder features 1 revolution. The product has an increased radial force by 10% when there is a power take-off from the center of the free end of the shaft. This device is associated with a flange with tolerance class N and designed as per IEC standard. The unit is not safeguarded against overloading and short circuit by its PTC that has a rated temperature of 155 °C +/-5%. It can have an increased length because of the feedback system. This motor in unison with the servo amplifier forms a closed torque or speed control loop.