Product Description

The AKM65P-ANCN2-00 synchronous servomotor produced by Kollmorgen has no customization. This motor is an integral part of the manufacturer's drive control system. The product offers no assurance of electrical safety without a low-resistance earth connection. This device should not be connected directly to the mains supply. The unit does not support the stacking of additional motors above its carton. Its nameplate contains details such as the number of phases, certification, standstill current, standstill torque and DC bus link voltage. This motor depicts a P type winding. The product has high dynamics because of the choice of materials for the permanent magnets in its rotor. This device is delivered without a holding brake. The unit is designed to support an installation altitude of 1000 m over sea level. It has a partial change in length due to its feedback system. This motor can be mounted both horizontally and vertically. The product is not protected against heavy overloading or short by means of the fitted electrically isolated PTC. This device has Class F insulation according to IEC 85 specifications. The unit comes equipped with angular connectors for its feedback and power supply signals. It portrays a static friction of 0.2 Nm. This servomotor uses a 18 x 18 x 0.5 in. aluminum plate as its heat sink. The product has a reduced continuous torque of 1.8 Nm. This device has five pole pairs. The unit has very low cogging. Its installation must be carried out taking care to ensure that there is unhindered ventilation. This motor related shaft and bearings get damaged when they are subject to force or blows.