Product Description

The Kollmorgen AKM65P-ACCNDA01 is a synchronous servomotor in the AKM series meant for demanding servo applications. Combined with Kollmorgen’s digital servo amplifier, the motor is especially intended for positioning tasks in machine tools, industrial robots, transfer lines, and the like. The device is installed as a component in an electrical apparatus or machine and can only be put into operation as an integral component of such an apparatus or machine. The unit should never be directly connected to the mains supply. The thermal contact integrated into the motor windings should be observed and evaluated. The product doesn’t have brushes as commutation is done electronically by the servo amplifier used. The AKM servomotor comes with a maximum bus voltage rating of 640 VDC. Its flange size is 138 mm and the rotor length is 5. The product is equipped with a keyway shaft provided with a shaft seal for improved environmental protection. Only personnel who are qualified and trained in electrical engineering should wire up the servomotor. At the time of wiring and assembly, the motor must be de-energized. The switch cabinet should remain turned off. Only during setup, the individual voltages must be turned on. The site of installation of the AKM servomotor should be free of aggressive and conductive material. In the case of IM V3 mounting, care should be taken that no liquids enter the bearings. If an encapsulated assembly is needed, the applications department of Kollmorgen should be consulted. The motor requires unimpeded ventilation. The permissible ambient and flange temperatures should be observed. In the case of ambient temperatures above 40°C, the applications department of the manufacturer should be consulted beforehand.