Product Description

The AKM65N-ANC2R-00 is a synchronous servomotor from Kollmorgen that is meant for demanding servo applications. Combined with a digital servo amplifier from the same manufacturer, the motor is intended for positioning tasks in machine tools, industrial robots, transfer lines, and so on. The unit is installed as a component in an electrical apparatus or machine and can only be put into operation as an integral component of such an apparatus or machine. The product does not have brushes as commutation is performed electronically by the servo amplifier used. The product comes in a matt black finish. The AKM servomotor has a maximum bus voltage rating of 640 VDC. Its flange size is 138 mm, and the rotor length is 5. The product is equipped with a smooth shaft. The device is equipped with an in-built 24V holding brake. Only personnel who are qualified and trained in electrical engineering must wire up the servomotor. During wiring and assembly, the device should be de-energized. The switch cabinet must remain switched off. Only during setup, the individual voltages should be turned on. The servomotor is equipped with a Resolver feedback device. It has rotatable angular connectors to enable power supply and feedback signals. The flange design is customized as per IEC standards. The site of installation of the AKM servomotor must be free of aggressive and conductive material. In the case of IM V3 mounting, it should be noted that no liquids enter the bearings. If an encapsulated assembly is required, the applications department of Kollmorgen should be consulted. The servomotor needs unimpeded ventilation to avoid overheating. The permissible ambient and flange temperatures must be observed. In the case of ambient temperatures over 40?C, the applications department of Kollmorgen must be consulted well in advance.