Product Description

The Kollmorgen AKM64L-KKCNLB00 is a synchronous servomotor designed for use in industrial environments. The device should be operated only under the ambient conditions defined in the product documentation. The motor must never be directly connected to the mains supply. The product should be packed using a cardboard packing with Instapak? foam cushion and it must be stored only in the original recyclable packaging of Kollmorgen. The device should be handled only by trained and qualified personnel. The maximum bus voltage rating of the AKM servomotor is 640 VDC. Its flange size is 138 mm and the rotor length is 4. The unit features L winding type and comes with an open keyway shaft. The motor has rotatable angular connectors for power supply and feedback signals. The unit is equipped with an EnDat 2.1 feedback device. The standstill torque of the motor is 21.0 Nm and its standstill current is 12.8 A with a tolerance of +/- 10%. The static friction torque of the motor is 0.15 Nm. The device has a mains voltage of 230-480 VAC. The housing of the AKM servomotor should be safely earthed to the protective earth busbar in the switch cabinet. A low-resistance earth connection is required to ensure electrical safety. When the device is live, connectors should never be unplugged. If they are unplugged, there is a danger of severe injury, extensive material damage, or even death. The device should be checked for bearing noise once every 2,500 operating hours. If there is any noise heard during operation, the operation of the motor should be stopped, and the bearings should be replaced. In general, the motor does not require any maintenance. If required, the manufacturer should be consulted.