Product Description

The Kollmorgen AKM64L-AN9NGE00 is a synchronous brushless DC servomotor designed especially for drives intended for industrial robots, machine tools, and textile machinery, basically for equipment that demands a high level of dynamics and stability. It should be noted that the motor must never be connected directly to the mains supply. The unit features the L winding type. The thermal sensors integrated into the windings of the motor must be observed and evaluated. The device comes with permanent magnets in the rotor. A three-phase winding that is driven by the servo amplifier used is integrated into the stator. The unit doesn’t have a holding brake. The AKM servomotor is equipped with a HIPERFACE DSL Encoder that serves as the feedback unit. The device has 10 poles. The product comes with a flange size of 138 mm and a rotor length of 4. The maximum bus voltage rating of the motor is 640 VDC. The device has a mains voltage of 230-480 VAC. The standstill torque of the unit is 21.0 Nm and its standstill current is 12.8 A with a tolerance of +/- 10%. The static friction torque of the servomotor is 0.15 Nm. The ambient temperature at which the product should be operated is 5°C to 40°C. Only qualified personnel should handle the servomotor in the case of assembling, wiring, operating and maintaining. The device must be protected from unacceptable stresses. At the time of transport, care should be exercised so that the components don’t bend, and the insulation clearances are not altered. Axial load must be avoided on the motor shaft as far as possible. Axial loading tends to shorten the life of the motor significantly.