Product Description

The Kollmorgen AKM63L-ACC2EN00 is a brushless DC servomotor designed for drives intended for machine tools, industrial robots, and textile machinery, basically for equipment that requires a high level of dynamics and stability. Care should be taken that the motor should never be connected directly to the mains supply. The device features the L winding type. There are thermal sensors integrated into the windings of the servomotor, which should be observed and evaluated. The product features permanent magnets in its rotor. A three-phase winding driven by the servo amplifier used is integrated into the stator. The AKM servomotor comes with a 24V holding brake. The device has 10 poles. The product comes with a flange size of 138 mm and a rotor length of 3. The maximum bus voltage rating of the motor is 640 VDC. The ambient temperature at which the motor should be operated is 5?C to 40?C. Only qualified personnel must handle the servomotor in the case of assembling, wiring, operating and maintaining. The device should be protected from unacceptable stresses. At the time of transport, care should be exercised so that the components do not bend, and the insulation clearances are not altered. The AKM servomotor comes with a keyway shaft. It is equipped with rotatable angular connectors to facilitate power supply and feedback signals. The holding brake is a standstill brake and is not suited for repeated operational braking. To ensure functional safety, the brake should be used with further equipment. The use of the motor is prohibited in areas where there is a risk of explosions. The device should not come in contact with food and beverages. The user should not open the motor for cleaning or repairing. Opening the motor voids the warranty. The housing of the device can be cleaned using isopropanol or a similar agent.