Product Description

The Kollmorgen AKM54G-ANC2R-00 synchronous servomotor is a three-phase brushless DC motor. This servomotor can be driven only by a SERVOSTAR digital servo amplifier. The product should be checked for the functioning of the holding brake at the time of setup. This device has a standstill torque that can be maintained indefinitely at a speed less than 100 min-1 and rated ambient conditions. The unit relies on a resolver for its feedback. It has a rated speed of 1500 min-1 at 400 V. This motor has a voltage rating of 24 VDC for its holding brake. The product has its output shaft on side A. This device can be mounted in IM B5, IM V1 and IM V3 positions. The unit depicts derated output when the operating temperature exceeds 45 °C. Its axial force must never exceed one-third of the radial force. This motor has an IP 65 protection rating. The product comprises an electrically isolated PTC with a switching point at 155 °C +/-5%. This device has an increased length because of the holding brake and cannot be retrofitted. The unit has a nameplate with its key technical details attached to the housing. It is needed to use a motor choke when a servo amplifier of the SERVOSTAR 601 to 620 series is used and the motor cable length is more than 25 m. The servomotor related electrical connections must not be undone when it is in the energized state. The product comprises a resolver lead with a capacitance of less than 120 pF/m. This device comes with a polyurethane sheathing for its leads. The unit comprises a black RAL 9005 coat on the housing. Its wiring must be done according to the installation and setup instructions of the corresponding servo amplifier. This product has a peak current that is approximately four times its rated current.