Product Description

The AKM53M-CNCNEM00 is a brushless DC servomotor launched by Kollmorgen. The motor should never be used outside the specified ambient operating conditions. The device does not support a direct connection to the mains supply. It can be directly mated to a SERVOSTAR digital amplifier. The transportation and storage of the device are to be done only in the manufacturer's original recyclable packaging. The product must be free of shock, especially at its shaft end at the time of transportation. The housing of the AKM servomotor can be cleaned using isopropanol or a similar agent. The motor should be checked once every 2,500 operating hours each year for bearing noise. If there are noises in the bearing, the operation of the motor should be stopped, and the bearings must be replaced. The unit has a nameplate stuck on its housing. The motor has a flange size of 108 mm and a rotor length of 3. It has a M winding type. The product has a smooth shaft and is equipped with rotatable angular connectors. The device does not have a brake. The installation and commissioning of the AKM servomotor must be done only after reading its associated documentation. The unit can be mounted and lifted horizontally as well as vertically. The stator of the motor has a three-phase winding that is driven by the servo amplifier used. The product depicts standard customization. The unit can be installed only in machinery for which a risk assessment has been done to make sure that unforeseen movements do not cause injury to the personnel involved. The temperature of the motor surface should be allowed to drop to below 40?C before it can be touched after its operation.