Product Description

The AKM53K-BKC2R-00 Kollmorgen synchronous servomotor must be wired by only people with expertise in the field of electrical engineering. This motor must be used only with a matching servo amplifier. The product should have an earth connection for its mounting plate and housing. This device is connected with a resolver for feedback. The unit is connected using cables that support trailing. It deploys angled and rotatable connectors. This motor can be deployed in both single-axis and multi-axis systems. The product has a fault in its output stage when there is an earth short or the motor has a short circuit. This device portrays a peak current that is about four times that of its rated current. The unit features a voltage constant that defines the induced emf. It has a torque constant of 0.99 Kt with a tolerance of +/-10%. This motor supports direct mating to most Kollmorgen servo drives. The product has a high level of flexibility. This device incorporates a flange that is mounted as per NEMA standards. The unit is not recommended for operation at a temperature higher than the specified range. It has a relative humidity of 95% without condensation during the operation phase. This servomotor has an IP 54 protection class. The product has a polyester powder coating on its housing. This device depicts vibration class A in accordance with EN 60034-14 specifications. The unit does not make use of a fan for its cooling. It must be checked for visible damage before it is put into operation. This motor related shaft and bearings tend to get damaged when subject to blows or very high force. The product needs to be in the de-energized state at the time of assembly and wiring.