Product Description

The AKM53K-ANCNR-00 servomotor manufactured by Kollmorgen is designed to deliver the best performance for industrial applications. It comes with a smooth shaft and isn’t equipped with a holding brake. The device can be lifted both horizontally and vertically. It cannot be directly connected to the mains supply. During the assembly, operation, storage, and transportation of the device, care should be taken to ensure there isn’t condensation on the surface of the motor. The unit has no derating for use in a site altitude of more than 1000 m above mean sea level and a temperature reduction of 10 K per 1000 m. The motor comes with ball bearings which should be replaced after 20,000 operating hours. The AKM servomotor is coated using a matt black polyester powder coating. This finish is not resistant to solvents. The motor comes with a resolver feedback system and has a standard construction. The motor features a Class F insulation. The motor comes with a standstill torque of 11.6 Nm with a tolerance of +/-10%. Its standstill current is 9.4 A with a tolerance of +/-10%. The unit comes with 10 poles in total. When setting up the device, one should ensure that there is sufficient heat transfer in the flange as well as the surroundings. The motor should be wired only by personnel qualified and trained in electrical engineering. If the electrical connections of the device are undone when it is energized, it can lead to unfavorable outcomes. The servomotor should always be used along with a suitable servo amplifier from the same manufacturer. When the product encounters a blow, its shaft and bearings can be damaged. The unit should never have a shaft mounting that is mechanically constrained.