Product Description

The AKM53K-ANCNDB00 synchronous brushless DC servomotor manufactured by Kollmorgen is intended for drives meant for equipment with high requirements for stability and dynamics, including textile and packing machinery, machine tools, and industrial robots. The motor must be operated only under the ambient conditions. When it comes to packing, the device must be packed using a cardboard packing that is equipped with Instapak® foam cushion. The unit is equipped with an EQN1x25 feedback device. The AKM servomotor features rotatable angular connectors to facilitate power supply and feedback signals. The standstill torque of the device is 11.6 Nm and its standstill current is 9.4 A. The rotor moment of inertia of the product is 9.1 J. The maximum bus voltage rating of the motor is 640 VDC. Its flange size is 108 mm and the rotor length is 3. The servomotor features K type winding and comes with a smooth shaft. The motor’s peak current value is 28.1 A and its peak torque is 30.1 Nm. The standard weight of the product is 7.4 kg. The servomotor must be assembled, stored, transported, operated, and maintained with extreme caution. Its housing should be safely earthed to the PE busbar in the switch cabinet. To ensure electrical safety, a low-resistance earth connection is needed. When the device is live, the connectors should not be unplugged, as it could lead to material damage, severe injury to persons, and sometimes death. The motor must be checked for bearing noise every 2,500 operating hours. If bearing noise is detected, the unit should be turned off and the bearing should be replaced. Only qualified personnel should handle the servomotor after reading the product documentation carefully.