Product Description

The AKM53K-ACC2R-00 is a synchronous servomotor designed for industrial applications. The servomotor is intended for drives meant for machinery with high requirements for dynamics and stability, such as machine tools, industrial robots, and textile and packing machinery. The motor should be operated only under the ambient conditions specified and defined in the product documentation. The device is installed as a component in machines or electrical apparatus and should only be commissioned and operated as an integral component of that machine or apparatus. The unit should never be directly connected to the mains supply. The AKM servomotor features a keyway shaft. The shaft is balanced with a short (half) key. The motor has permanent magnets in the rotor. Its rotor length is 3. A three-phase winding driven by the servo amplifier used is integrated into the stator. The device doesn’t have any brushes as commutation is electronically performed by the servo amplifier. The peak current of the servomotor is 28.1 A and the peak torque is 30.1 Nm. The standard weight of the device is 7.4 kg. The radial load permitted at the shaft end of the motor at 3000 per minute is 450 N and the axial load permitted at the shaft end at 3000 per minute is 180 N. The AKM servomotor is precision equipment. The shaft and flange are especially vulnerable at the time of storage and assembly. So, the user should avoid brute force. Precision demands delicacy. The locking thread should be used to tighten up gear wheels, couplings, or pulley wheels and warm up the components of the drive, where possible. The use of force or blows often leads to damage to the shaft and the bearings. It should be noted that opening the servomotor invalidates the warranty. If the motor housing is dirty, it should be cleaned using isopropanol or something similar. The motor should not be sprayed or immersed.