AKM52M-ACC2C-01

Product Description

The AKM52M-ACC2C-01 Kollmorgen synchronous servomotor in unison with a matching digital SERVOSTAR servo amplifier offers a closed loop speed or position control drive control system. This motor has a spring-applied holding brake. The product housing must be earthed to the busbar in the switch cabinet. This device has a surface temperature of over 100 ?C when it is in use. This unit comes with the key of its shaft protected by a cap. It may get damaged when the rated current and voltage are above the permissible limits. The motor connectors must not be unplugged during operation as touching the exposed parts can cause severe injury. The product does not guarantee personnel protection without establishing a low-resistance earthing connection. This device has a voltage constant of 42.4 mVmin. The unit should not be immersed in liquid to clean its surface. It must be ensured that the nameplate of the servomotor is clearly visible when it is installed. This motor houses permanent magnets designed using neodymium-iron-boron magnetic materials. This product has an increased length due to its holding brake. The device depicts power derating at an ambient temperature of 40 ?C if the installation elevation exceeds 1000 m above sea level. This unit has a RAL 9005 enamel finish on its housing. It transmits power through its cylindrical shaft end. The motor encounters a very high radial force if toothed belts are used to drive it. This product has IP 67 degree of protection as a result of its radial shaft seal. The device does not come with mating connectors but is fitted with angular connectors.