Product Description

The AKM52K-CCCN2-00 synchronous servomotor from Kollmorgen features plug-and-play motor recognition. This motor has a keyway shaft and a flange that is mounted in accordance with alternative IEC standards. This product has a mains voltage rating of 480 VAC. The device also portrays a standstill torque of 8.60 Nm. This unit is CE Certified and cUL Recognized. Its windings encompass a thermal contact that must be evaluated and observed. The motor bearings should be replaced after an operation period of 20,000 hours. This product can be cleaned with an agent like isopropanol if its housing is dirty. The device cleaning and maintenance must be done by only qualified personnel. This unit supports a storage temperature range of 25 ?C to 55 ?C with a maximum variation of 20K per hour. It is free of substances that are harmful to the environment. This servomotor features K type winding. The product helps to meet high dynamic and stability requirements. This device can be mounted vertically with the shaft facing either upward or downward. The motor features zero backlash coupling when double-coned bearings are used. This product associated EMC shielding plus earthing must be established correctly. The device has to be checked for compliance with the allowed axial and radial forces at the time of its electrical installation. This unit has a torque constant of 0.66 Nm/A. It is easy to commission and use. The motor has low harmonic distortion. This product uses UL Listed cables with a lifetime of 1 million bending cycles. This device shows no signs of its shaft rotating when the servo drive is mechanically blocked. The unit is associated with a high degree of flexibility.