AKM52K-ANDB02

Product Description

The AKM52K-ANDB02 synchronous servomotor is produced by Kollmorgen. The motor has a flange size of 108 mm and a rotor length of 2. The unit has a K type winding. The product is meant to be driven by a SERVOSTAR series digital servo amplifier. The unit should be handled only by personnel trained and qualified in mechanical and electrical engineering. The device is not suitable for use in residential environments. The housing of the motor should be earthed properly before it is operated. The AKM servomotor portrays a standstill torque of 8.60 Nm and a standstill current of 13.1 A. The device has a thermal contact integration in its windings. This servomotor is equipped with 10 poles. The rotor moment of inertia of the motor is 6.2 J and its static friction torque is 0.04 Nm. The thermal time constant of the device is 24 minutes. The radial load permitted at the shaft end of the AKM servomotor at 3000 per minute is 450 N. The standard weight of the unit is 5.8 Kg. The peak current of the servomotor is 27.8 A and its peak torque is 21.9 Nm. The AKM servomotor must be protected against brute force on its flange and shaft. The device associated couplings are tightened using a locking thread. The motor encounters radial and axial forces when it is in operation. Its switch cabinet should be switched off during the electrical installation process. This motor wiring should be done as per the instructions provided for the same in the manual of the servo amplifier used. The user should not open the device for cleaning or other purposes, because opening the motor invalidates the warranty.