Product Description

The AKM52H-BKCN2-00 synchronous servomotor by Kollmorgen may have live power connections even when its shaft is not rotating. This motor comprises ball bearings with a service life of at least 20,000 operating hours. The device has a matt black enamel over its housing. The unit has a cylindrical shaft end on side A through which its power transmission is done. It has an electrically isolated PTC with a switching point at 155 ?C +/-10% for protection. This motor is delivered without a holding brake. The product does not support any retrofitting. The device has a three-phase brushless design. This unit along with the SERVOSTAR servo amplifier forms a closed speed-control or torque-control loop. Its standstill current, mains voltage, rated power and a few other technical details on its nameplate. The motor is less prone to electromagnetic interference the distance between its power and control cables is more than 20 cm. This product may have a dangerous voltage for five minutes after the mains supply is switched off. The device must be installed in a site that is free of conductive and aggressive materials. This unit must not be overstressed when it is fixed in place during assembly. Its power connections must be established using only the manufacturer's preassembled cables. The servomotor can have a high electrical voltage of 900 V at the live connection points. This product has a standstill torque that can be maintained indefinitely at rated ambient conditions and when the speed is less than 100 min-1. The device has very low harmonic distortion.