AKM52G-CNCNR-00

Product Description

The AKM52G-CNCNR-00 synchronous servomotor manufactured by Kollmorgen features very low clogging. This product has a rotor length of 2. The device must always be connected to an appropriate SERVOSTAR digital servo amplifier before its operation. This unit has a cylindrical shaft end through which its power transmission is done. It is subject to axial force when it is used in conjunction with angular gearheads. The motor has no shaft seal around the shaft. This product can be delivered with a KTY 84-130 or a PT1000 temperature monitoring sensor if needed. The device meets vibration class A requirements as per EN 60034-14 specifications. This unit uses a resolver to implement its feedback. Its resolver uses a feedback cable with 4 x 2 x 0.25 sq-mm cross-section. The servomotor has a static friction torque of 0.04 Nm. This product has a flange of 108 mm size. The device comes with a keyway shaft that is balanced with a half key. Its matt black finish does not have resistance to any solvents. This unit supports 450 N radial load at the shaft end at a speed of 3000 min-1. It is not recommended for encapsulated mounting. The motor features IM B5 standard mounting style as per DIN EN 60034-7 specifications. This product is associated with an IP 65 protection class. The device depicts a 10% increase in radial force when the power take-off occurs from the center of the output shaft. This unit does not guarantee protection against short circuit or heavy overloading with its electrically isolated PTC. It features Class F insulation as per IEC 85 specifications. The motor comes with a copy of the operating manual printed in multiple languages.