Product Description

The AKM44J-ANCNDB00 is a synchronous servomotor from the house of Kollmorgen that is designed exclusively for industrial needs. The device has a flange size of 84 mm and a rotor length of 4. The motor features a smooth shaft. There are no brushes in the device; commutation is done electronically by the servo amplifier used. When installing the unit, care should be exercised. The site of installation must be free from conductive and aggressive material. The product is coated with polyester powder coating in matt black. The AKM servomotor sports an EQN1x25 feedback system. The maximum mains voltage of the unit is 480 VAC. The device should not be connected directly to the mains supply. The servomotor has a peak current of 35.2 A and a peak torque of 20.4 Nm with a tolerance of +/- 10%. The rated speed of the unit at 400 V is 6000 per minute. The product must be operated only under the ambient conditions. In terms of packing, the device should be packed with a cardboard packing equipped with Instapak? foam cushion. The AKM servomotor must be assembled, transported, and operated with extreme caution. Its housing should be earthed safely to the PE busbar within the switch cabinet. A low-resistance earth connection is needed to ensure electrical safety. The operator must not unplug the connectors when the device is live, because it could result in material damage and severe injury to persons. The device has ball bearings. The motor should be checked for bearing noise once every 2,500 operating hours. If any noise is heard from the bearings when the device is live, the motor should be turned off and the bearings should be replaced. Only trained and qualified personnel should handle the servomotor after carefully reading the documentation.