Product Description

Kollmorgen produces a wide range of products relevant to industrial automation. A few of the company's resources that are widely used in the market are drive controllers and AC servo motors. The AKM44G-AC92CA00 model is equipped with a holding brake that generates a holding torque of 6 Nm and weighs 0.63 kg. The application delay and release delay times of the holding brake are 15 and 35 milliseconds, respectively. The model power values cannot be produced unless the installation height and temperature requirements of 1000m above sea level and 5 to +40 degrees Celsius, respectively, are fulfilled. This AKM44G servo motor's output shaft has keyways. This servo motor is one of the products supplied by the company that allows for maximum flexibility and modification to meet specific customer requirements. The model is equipped with a Smart Feedback Device and a balancing class of N. The model consumes a standstill current of 5 A while generating a standstill torque of 5.88 Nm. The power supply and feedback signals are connected to the motors via angular connectors. The delivery package does not include the mating connectors. The AKM44G servo motor has an 84 mm flange size and an insulation class of F. The model's AKM44G-AC92CA00 contouring accuracy is exceptional, which is critical while operating at high speeds. The model weighs 5.3 kilograms and can rotate at a rated speed of 4000 RPM while generating a rated power of 1.67 kW. The motor (AKM44G-AC92CA00) is protected to IP65 standards and has a 2.65-ohm winding resistance and an 11.5 mH winding inductance. The motor is equipped with an electrically isolated PTC. The thermostat does not protect against short, heavy overloads.