Product Description

The Kollmorgen AKM43E-ANCNR-00 synchronous servomotor has a nameplate stuck onto its housing using an adhesive. This product has E type winding. The device comes with a two-pole hollow-shaft resolver. The device comes with a smooth and is not fitted with any holding brake. This unit is subject to high radial force when toothed belts or pinions are used. It does not have a seal around its output shaft. The motor flange needs to be safeguarded against the influence of cleaning agents by opting for a suitable assembly. This product must have unhindered ventilation at the time of its operation. The device wiring is allowed only by people qualified and trained in electrical engineering. This unit must be in the de-energized state during the assembly and wiring stages. It may cause severe injury when its exposed contacts are touched. The servomotor needs to be provided with EMC shielding as per the instructions given in the manual of the servo amplifier. This product must be used with a motor choke if the motor cable length is more than 25 m long. The device tends to have a high electric voltage of up to 900 V at the time of operation. This motor setup involves checking if its rotor revolves freely and if the drive elements have been properly fitted. The unit portrays an oscillating action in a single-axis system if its drive gain is too high or the resolver cable has broken shielding. Its temperature rise takes place rapidly when it is loaded with the peak current. The motor has a peak current rating based on the peak current of the related servo amplifier.