Product Description

The AKM43E-ACCNAB00 synchronous servomotor by Kollmorgen is meant to be driven by a matching SERVOSTAR servo amplifier from the same manufacturer. This product should be inspected for damage after transportation and before it is operated. The device must be kept free of condensation all the time. This unit has to be checked for bearing noises every year after every 2500 operating hours. It is RoHS Compliant and EAC Certified. The motor must not be operated in areas where there is a possibility of an explosion. This product has a maximum DC bus link voltage of 640 VDC. The device depicts the technical details needed at the time of service on its nameplate. It must be ensured that there are no deviations from the technical data specified on the nameplate. This motor is delivered along with a plastic cap for the protection of its shaft key. The product should be touched only after measuring and confirming that its surface temperature is less than 40 °C. This device is to be operated only in electrical machinery. The servomotor is meant to be put to use only after reading its manual and observing the safety notices mentioned in the same. This unit should be allowed to run free without a coupled load only after its fitted key has been removed. It poses a risk of electric shock without a proper grounding connection. The motor may trigger flashovers when its live power connectors are removed. This device can be fitted in industrial robots for high dynamics. The unit is to be cleaned and maintained only by qualified personnel by observing the specified conditions.